服务热线:18126505465 官方微信 话题标签 网站地图 EN
当前位置 :

我们的服务

联系我们 +

服务热线 18126505465
总部
电话:400-1162629 邮箱:wenxuan.gan@lcs-cert.com 深圳市宝安区沙井街道衙边学子围巨基工业园A栋1~2楼

汽车电子检测

  • 各类车用电子部件:
  • 车载摄像头
  • 空调控制器
  • 导航
  • 组合灯
  • 氛围灯
  • 阅读灯
  • 4GTbox
  • 5GTbox
  • 仪表
  • 车窗控制开关
  • 车窗电机
  • 电子后视镜
  • 驾驶角度传感器
  • 车用无线电
  • 暖通空调
  • 防盗中控系统
  • 控制器
  • 显示器
  • 照明
  • 底盘位置传感器和控制器
  • 轮胎压力传感器
  • 倒车提醒装置
  • ACP、VCP、CCH功放
  • 全球定位装置
  • 直流马达(用于天空、座椅、车门、车窗、雨刮器)
  • EMC测试项目
  • 辐射发射
  • 会导发射
  • 会导瞬态发射
  • 辐射抗扰度测试—电波暗室试验法
  • 大电流注入测试—代替法
  • 大电流注入测试—闭环法
  • 传导瞬态抗扰度测试—电源线
  • 传导瞬态抗扰度测试—信号线、电感耦合钳试验法
  • 传导瞬态抗扰度测试—信号线,直接电容耦合试验法
  • 传导瞬态抗扰度测试—信号线,电容耦合钳试验法
  • 磁场抗扰度测试
  • 静电放电测试

 

测试标准:

CE

ECE R10

Unform provisions concerning the approval of vehicles with regard to electromagnetic compatibility.

CISPR

CISPR 25

Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of on-board receivers

EN

EN 13309

Construction machinery – Electromagnetic compatibility of machines with internal power supply

EN

EN 50498

Electromagnetic compatibility (EMC) – Product family standard for aftermarket electronic equipment in vehicles

EN

EN 55025

Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers

ISO

ISO 10605

Road vehicles — Test methods for electrical disturbances from electrostatic discharge

ISO

ISO 11452-1

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology

ISO

ISO 11452-2

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure

ISO

ISO 11452-3

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic mode (TEM) cell

ISO

ISO 11452-4

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI)

ISO

ISO 11452-5

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline

ISO

ISO 11452-7

Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 7: Direct radio frequency (RF) power injection

ISO

ISO 11452-8

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields

ISO

ISO 11452-9

Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 9: Portable transmitters

ISO

ISO 11452-10

Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 10: Immunity to conducted disturbances in the extended audio frequency range

ISO

ISO 12097-3

Road Vehicles – Airbag Components – Part 3: Testing of Inflator Assemblies

ISO

ISO 13766

Earth-moving machinery Electromagnetic compatibility

ISO

ISO 16750-2

Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Electrical loads

ISO

ISO 17025

General requirements for the competence of testing and calibration laboratories

ISO

ISO 7637-1

Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations

ISO

ISO 7637-1-2

ISO

ISO 7637-2

Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only

ISO

ISO 7637-3

Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

SAE

J1113-3

Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power

SAE

J1113-4

IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS.BULK CURRENT INJECTION (BCI) METHOD

SAE

J1113-11

Immunity to Conducted Transients on Power Leads

SAE

J1113-12

Electrical Interference by Conduction and CouplingCapacitive and Inductive Coupling via Lines Other than Supply Lines

SAE

J1113-13

Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsPart 13: Immunity to Electrostatic Discharge

SAE

J1113-21

Electronmagnetic Compatibility Measurement Procedure for Vehicle Components – Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber

SAE

J1113-22

Electromagnetic Compatibility Measurement Procedure for Vehicle Components—Part 22—Immunity to Radiated Magnetic Fields

SAE

J1113-23

Electromagnetic Compatibility Measurement Procedure for Vehicle Components – Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method, Recommended Practice

SAE

J1113-24

Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz—Crawford TEM Cell and 10 kHz to 5 GHz—Wideband TEM Cell

SAE

J1113-41

Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used on Board Vehicles

SAE

J1113-42

Electromagnetic Compatibility—Component Test Procedure—Part 42—Conducted Transient Emissions

ECE R10

CISPR 25

EN 13309

EN 50498

EN 55025

ISO 10605

ISO 11452-1

ISO 11452-2

ISO 11452-3

ISO 11452-4

ISO 11452-5

ISO 11452-7

ISO 11452-8

ISO 11452-9

ISO 11452-10

ISO 12097-3

ISO 13766

ISO 16750-2

ISO 17025

ISO 7637-1

ISO 7637-1-2

ISO 7637-2

ISO 7637-3

J1113-3

J1113-4

J1113-11

J1113-12

J1113-13

J1113-21

J1113-22

J1113-23

J1113-24

J1113-41

J1113-42

专业设备

  • 3米电波暗室
  • CISPR25电波暗室
  • 罗德与施瓦茨ESR3EMI接收机
  • 夏弗纳CBA9436射频功放
  • CPIVZS/C-6963J2功放
  • ARFL7006场强探头
  • 罗德与施瓦茨E8257D信号发生器
  • MilmegaAS0104-400/200STRF射频功放
  • AR100W1000B100W功放
  • 特测NSG437静电放电枪
  • EMTest传导瞬态抗扰度测试系统
  • 泰克TDS3054B示波器
  • 高压人工网络
  • EMTest连续波模拟器
汽车电子检测
汽车电子检测

获取报价

公司名称: *
您的姓名:*
您的手机:*
您的需求:*

*为了您 的权益,您的信息将被 严格保密

信息提交成功

专业工程师将飞快联系您,为您提供合适 解决方案,期待与您相遇~

微信公众号
分享行业干货
微信咨询
请备注咨询服务

庆祝立讯成立20周年 检测认证服务立减科技创新券 点击领取合同

X